Polylock LRF ECO is a two-component, low-rise, solvent-free polyurethane foamable adhesive designed to deliver fast, efficient insulation and fleeceback membrane attachment while eliminating high GWP blowing agents and reducing environmental impact without compromising jobsite productivity. Free of HFCs, and HFOs, it contains no high Global Warming Potential (GWP) blowing agents and utilizes naturally occurring atmospheric gases, eliminating the need for chemical propellants and reducing environmental impact while remaining compliant with all current regulations.
Designed for speed and versatility, the dual pressurized canister system includes twenty-five-foot hoses, applicator, and accessories for an all-in-one solution that requires no additional equipment. An adjustable nozzle enables both spatter and ribbon application, enhancing productivity and jobsite flexibility. The adhesive sets in minutes, reducing installation time while eliminating deck penetrations, corrosion risk, and occupant disruption. It helps improve thermal efficiency by eliminating thermal bridging from fasteners, maximizing R-value and supporting long-term energy savings, while its ultra-low VOC formulation supports safer application environments.
Features and Benefits
- Provides excellent wind-uplift resistance characteristic of adhered systems.
- Applicator, hose, and all accessories needed are included with each canister set, ensuring
there is no extra equipment or additional steps needed.
- Polylock LRF ECO eliminates potential for roof deck corrosion and disruption of building
occupants due to fastening.
- Fast application, quick adhesive set in period helping improve installation productivity and
labor savings.
- Using Polylock LRF ECO in lieu of mechanical fasteners eliminates thermal bridging and
ensures maximum R-Value.
- Contains no CFC or HCFC, high global warming potential propellants which ensures the product meets all current national and state regulations.
- Ultra low VOC content formula is approved for use in all OTC and SCAQMD regulated regions.
- Adjustable nozzle enables both spatter and ribbon application for increased productivity and jobsite flexibility.
Polyglass PMMA High Traffic Textured (HTT) Surface Finish is a high performance, rapid-curing, flexible, methacrylate resin with a pre-mixed aggregate, designed for pedestrian and/or vehicular traffic. It can be applied as a non-reinforced liquid applied surfacing material or as the trafficable surface coat over a reinforced PMMA Waterproofing System.
Elastoflex SA V Flashing Strips are factory cut rolls of Elastoflex SA V membrane featuring patented ADESO® Dual-Compound Technology. The Styrene-Butadiene-Styrene (SBS) modified asphalt compound is applied on the top layer and an aggressive self-adhesive compound is applied on the bottom layer. Elastoflex SA V Flashing Strips are compromised of a high performance reinforced fiberglass mat for excellent dimensional stability. Elastoflex SA V Flashing Strips are finished with a polyolefin film on the top surface and a split release film protecting the adhesive on the bottom surface.
Polyglass LRF M-PG is a low rise, all purpose foamable adhesive designed to adhere insulation boards and cover boards to a variety of substrates and roof decks. Part A and Part B of Polyglass LRF M-PG are each packaged in 5 gallon bag in a box. Both parts are equally mixed and ready to dispense via low pressure pump cart.
Polyglass LRF M is a highly elastomeric, all-purpose, foamable adhesive designed to adhere insulation boards and cover boards to a variety of substrates and roof decks. Polyglass LRF M is packaged in a 1.5 liter cartridge and is ready to dispense via a battery powered applicator.
Elastoflex SA Base membrane is a self-adhered, elastomeric base ply low-slope roofing product manufactured using patented ADESO® dual-compound self-adhered technology, whereby a “true” Styrene-Butadiene-Styrene (SBS) modified asphalt compound is applied on the top layer and an aggressive self-adhesive compound is applied on the bottom layer. Elastoflex SA Base membrane is built with a strong non-woven polyester mat to enhance tear strength and puncture resistance, providing a robust membrane that resists natural forces and other factors on the rooftop.
When used in conjunction with Elastoflex SA P or other approved Polyglass self-adhered cap sheet, Elastoflex SA Base provides cleaner application, improved application speed and removes the need for torches, hot asphalt or bonding adhesives on the job site.
Elastoflex SA Base membrane is finished with film that has laylines on the top surface and a split release film on the bottom surface.
Polytherm G is a highly energy efficient rigid insulation board composed of a closed-cell Polyisocyanurate foam core laminated to inorganic coated glass facers for superior bonding characteristics. Polytherm G is manufactured with a facer ideally suitable for many types of roofing products, including the direct application of ADESO® dual-compound self-adhered membranes under most project circumstances. Available in flat and tapered panels.
Elastobase SA membrane is a self-adhered, elastomeric base ply low-slope roofing product manufactured using patented ADESO® dual-compound self-adhered technology, whereby a “true” Styrene-Butadiene-Styrene (SBS) modified asphalt compound is applied on the top layer and an aggressive self-adhesive compound is applied on the bottom layer. Elastobase SA membrane is built with a reinforced fiberglass mat which provides strength and excellent dimensional stability.
Elastobase SA is designed to be used as a base sheet in “Stick 1 – Torch 1” applications where the cap sheet is heat welded. Polyglass offers a variety of compatible APP and SBS torch cap sheets.
Elastobase SA membrane is finished with a film top surface and a split release film on the bottom surface.
Elastoflex SA P FR is a self-adhered Styrene-Butadiene-Styrene (SBS) granulated cap sheet, with fire retardant additives, for use in low-slope roofing. Elastoflex SA P FR is manufactured using Polyglass’ patented ADESO® Dual-Compound Self-Adhered Technology. With this technology, a “true” elastomeric modified asphalt compound is applied to the top of the membrane and an aggressive self-adhesive proprietary compound is applied to the bottom. Elastoflex SA P FR is constructed with a tough non-woven polyester reinforcement that provides flexibility and dimensional stability as well as excellent tear and puncture resistance.
The top surface of Elastoflex SA P FR has a granular finish with mulitple color options. Elastoflex SA P FR also features SEALLap® ULTRA, a granule-free side lap with self-adhesive compound and FASTLap®, granule free end lap. Each of these patented features provide for greater ease of applications as well as improved long-term performance.
Elastoflex SA P FR can be used as part of a Polyglass warranted multi-ply system with Elastoflex SA V, Elastoflex SA V Plus, or other top film-surfaced Polyglass base sheets to provide a cleaner application, improved application speed and removes the need for torches, hot asphalt or bonding adhesives on the job site.
Elastoflex S6 G HP FR is a superior SBS (Styrene-Butadiene-Styrene) modified bitumen roofing membrane with fire retardant additives, and reinforced with a high performance non-woven polyester mat that provides flexibility and dimensional stability as well as excellent tear and puncture resistance. The proprietary SBS compound offers superb waterproofing and weathering physical properties. Elastoflex S6 G HP FR is designed for use as cap sheet in multilayer low-slope assemblies.
Elastoflex S6 G HP FR has a granular top surface in multiple color options and a sand or burn-off film bottom surface. Application methods include heat welding, when a film bottom surface is selected, and hot asphalt or cold adhesive when the membrane is sand backed.
Elastoflex S6 G HP FR membrane can be used as part of a Polyglass warranted multi-ply system, when combined with Elastoflex S6 base or interply sheets or other approved Polyglass base sheets.
Polyflex G FR is an APP (plastomeric) granulated cap sheet with fire retardant additives for use in low-slope roofing and designed for heat welded applications. Polyflex G FR incorporates a superior non-woven polyester reinforcement which provides flexibility and dimensional stability as well as exceptional tear and puncture resistance. The proprietary APP (plastomeric) compound and durable construction provides long-term weathering performance. The top surface is granulated while the bottom surface has a factory applied burn-off film.
Polyflex G FR cap sheet features Polyglass’ patented FASTLap® for granule free end laps. FASTLap provides greater ease and speed of application as well as improved long term watertight seal.
Polyflex G FR membrane can be used as part of a Polyglass warranted multi-ply system, when combined with Polyflex base or interplay sheets or other approved Polyglass base sheets.
PolyBrite 70 is a 100% acrylic, premium grade water-based elastomeric coating which cures to form a seamless membrane. PolyBrite 70 reduces roof temperatures, extends the life cycle performance of new and existing roof systems, provides protection from ultraviolet sunlight and other weather exposures.
Polystick IR-Xe, is a homogeneous rubberized asphalt waterproofing compound, fiberglass reinforced, with an aggregate surface for skid resistance for use in ice and water protection applications. The rubberized asphalt seals around correctly installed nails on the weathering surface. Split release backing film aids in easy positioning of sheets to maintain proper line.
Polystick IR-Xe underlayments are manufactured using patented ADESO® Dual-Compound Self-Adhered technology, whereby a “true” polymer modified asphalt compound is applied on the top layer and an aggressive self-adhesive compound is applied on the bottom layer.
PolyBrite 77 is a thermoplastic rubber coating and mastic designed for waterproofing a variety of structural surfaces.