PolyBrite QS is a premium grade water-based elastomeric coating engineered with quick set polymers which provide early-stage resistance to rain and heavy dew exposure. Formulated with advanced acrylic polymers, it creates a seamless, flexible membrane that resists cracking, peeling, and UV degradation while extending the useful life of the roof.
Its reflective properties help decrease roof surface temperatures, contributing to reduced energy costs, and its high tensile strength and elongation allow it to accommodate building movement.
PolyBrite QS also resists dirt pick-up, fungal and algal growth, and features a low VOC, non-flammable formulation for safer application.
Features and Benefits
• Rain resistant in as little as 25 minutes
• Extends the useful life of the roof
• UV resistant
• Decreases roof surface temperature, which can reduce energy costs
• Offers high tensile strength and elongation
• Resistant to dirt pick up and is fungal and algal resistant
• Low VOC and non-flammable
Polylock LRF ECO is a two-component, low-rise, solvent-free polyurethane foamable adhesive designed to deliver fast, efficient insulation and fleeceback membrane attachment while eliminating high GWP blowing agents and reducing environmental impact without compromising jobsite productivity. Free of HFCs, and HFOs, it contains no high Global Warming Potential (GWP) blowing agents and utilizes naturally occurring atmospheric gases, eliminating the need for chemical propellants and reducing environmental impact while remaining compliant with all current regulations.
Designed for speed and versatility, the dual pressurized canister system includes twenty-five-foot hoses, applicator, and accessories for an all-in-one solution that requires no additional equipment. An adjustable nozzle enables both spatter and ribbon application, enhancing productivity and jobsite flexibility. The adhesive sets in minutes, reducing installation time while eliminating deck penetrations, corrosion risk, and occupant disruption. It helps improve thermal efficiency by eliminating thermal bridging from fasteners, maximizing R-value and supporting long-term energy savings, while its ultra-low VOC formulation supports safer application environments.
Features and Benefits
- Provides excellent wind-uplift resistance characteristic of adhered systems.
- Applicator, hose, and all accessories needed are included with each canister set, ensuring
there is no extra equipment or additional steps needed.
- Polylock LRF ECO eliminates potential for roof deck corrosion and disruption of building
occupants due to fastening.
- Fast application, quick adhesive set in period helping improve installation productivity and
labor savings.
- Using Polylock LRF ECO in lieu of mechanical fasteners eliminates thermal bridging and
ensures maximum R-Value.
- Contains no CFC or HCFC, high global warming potential propellants which ensures the product meets all current national and state regulations.
- Ultra low VOC content formula is approved for use in all OTC and SCAQMD regulated regions.
- Adjustable nozzle enables both spatter and ribbon application for increased productivity and jobsite flexibility.
PG 800W is an asphalt-based, clay emulsion product that can be used as a protective roof coating. It can be used over smooth surfaced asphalt built-up, modified bitumen membranes. Also, for use as a base coat for reflective elastomeric coatings. PG 800W can be used as a surface protectant or waterproofing when used in conjunction with polyester reinforcement.
When applied as a roof protectant PG 800W’s unique formulation allows the film to “breathe” while drying and is waterproof upon curing.
Elastoflex V is a high quality, fiberglass reinforced, SBS (Styrene-Butadiene-Styrene) modified bitumen roofing membrane. Elastoflex V is specially designed with a sand surface and either a sand back (for hot mop or cold process applications) or with a polyethylene burn-off film (for heat weld applications). Reinforced with a superior fiberglass mat, the Elastoflex V exhibits exceptional dimensional stability and puncture resistance. Manufactured for the commercial, industrial and residential markets, the proprietary SBS compound will offer long term performance and can be warranted as part of an approved Polyglass assembly.
Elastoflex S6 G FR is a superior SBS (Styrene-Butadiene-Styrene) modified bitumen roofing membrane with fire retardant additives, and reinforced with a non-woven polyester mat that provides flexibility and dimensional stability as well as excellent tear and puncture resistance. The proprietary SBS compound offers superb waterproofing and weathering physical properties. Elastoflex S6 G FR is designed for use as cap sheet in multilayer low-slope assemblies.
Elastoflex S6 G FR has a granular top surface in multiple color options and a film bottom surface for heat-welded application methods.
Elastoflex S6 G FR membrane can be used as part of a Polyglass warranted multi-ply system, when combined with Elastoflex S6 base or interply sheets or other approved Polyglass base sheets.
Elastoflex S6 G is a superior (Styrene-Butadiene-Styrene) SBS modified bitumen roofing membrane reinforced with a non-woven polyester reinforcement that provides flexibility and dimensional stability as well as excellent tear and puncture resistance. The proprietary SBS compound offers superb waterproofing and weathering physical properties. Elastoflex S6 G is designed for use as cap sheet in multi-layer low-slope assemblies.
Elastoflex S6 G has a granular top surface in multiple color options and a sand or burn-off film bottom surface. Application methods include heat welding, when a film bottom surface is selected, and hot asphalt or cold adhesive when the membrane is sand backed.
Elastoflex S6 G membrane can be used as part of a Polyglass warranted multi-ply system, when combined with Elastoflex S6 base or interply sheets or other approved Polyglass base sheets.
Elastoshield TS G FR membranes are premium elastomeric, fire-rated, SBS (Styrene- Butadiene-Styrene) modified asphalt roofing membranes specially designed for hot asphalt, cold adhesive or heat welding (with burn-off polyethylene) applications. Reinforced with a superior polyester membrane, the Elastoshield TS G FR exhibits exceptional tensile strength and puncture resistance. The granulated surface provides superior long term UV protection. Manufactured for the commercial, industrial and residential markets, the proprietary SBS asphalts and product composition will offer long term resistance to moisture, dimensional stability and flexibility. The top surface of the Elastoshield TS G FR membrane has a granular finish available in a variety of colors, free of granules along the selvage edge.
Polyfresko G SBS FR is a premium Styrene-Butadiene-Styrene (SBS) granulated cap sheet with fire retardant additives for use in low-slope roofing. Polyfresko G SBS FR is constructed with a superior non-woven polyester reinforcement that provides flexibility and dimensional stability as well as excellent tear and puncture resistance. Polyfresko G SBS FR has a film bottom surface for heat welding application.
Featuring patented CURE Technology®, Polyfresko G SBS FR has a highly reflective granule surface which meets, or exceeds most standards for cool roofing. CURE Technology features an innovative thin film technology attributing to exceptional granule retention, minimal staining, scuff resistance and UV stabilization for long-term durability and performance.
Polyfresko G SBS FR can be used as part of a Polyglass warranted multi-ply system, when combined with Elastoflex S6 or other approved Polyglass base sheets.
Elastoflex S6 G is a superior SBS (Styrene-Butadiene-Styrene) modified bitumen roofing membrane reinforced with a non-woven polyester mat that provides flexibility and dimensional stability as well as excellent tear and puncture resistance. The proprietary SBS compound offers superb waterproofing and weathering physical properties. Elastoflex S6 G is designed for use as cap sheet in multilayer low-slope assemblies.
Elastoflex S6 G has a granular top surface in multiple color options and a film bottom surface for heat-welded application methods.
Elastoflex S6 G membrane can be used as part of a Polyglass warranted multi-ply system, when combined with Elastoflex S6 base or interply sheets or other approved Polyglass base sheets.
Elastoflex S6 G FR is a superior SBS (Styrene-Butadiene-Styrene) modified bitumen roofing membrane with fire retardant additives, and reinforced with a non-woven polyester reinforcement that provides flexibility and dimensional stability as well as excellent tear and puncture resistance. The proprietary SBS compound offers superb waterproofing and weathering physical properties. Elastoflex S6 G FR is designed for use as cap sheet in multi-layer low-slope assemblies.
Elastoflex S6 G FR has a granular top surface in multiple color options and a sand or burn-off film bottom surface. Application methods include heat welding, when a film bottom surface is selected, and hot asphalt or cold adhesive when the membrane is sand backed.
Elastoflex S6 G FR membrane can be used as part of a Polyglass warranted multi-ply system, when combined with Elastoflex S6 base or interply sheets or other approved Polyglass base sheets.
Polyglass G2 Base is a premium, inorganic fiberglass mat reinforced base sheet which has been saturated and coated with a weathering grade asphalt. The top surface is then coated with a fine mineral parting agent to prevent sticking in the roll. Designed as an ideal first roofing ply in SBS/APP modified or Built Up roofing systems, this wrinkle resistant easy roofing membrane can be installed over a variety substrates.
Elastobase V is a high quality Styrene-Butadiene-Styrene (SBS) modified bitumen roofing membrane reinforced with a high quality fiberglass mat which provides strength and excellent dimensional stability. The proprietary SBS compound offers quality waterproofing and weathering physical properties. Elastobase V is designed for use as a base ply layer in multi-layer low-slope assemblies.
The top and bottom surfaces are available in sand or factory applied burn-off film.
Elastobase V is intended for use as a base ply or interply membrane and designed to be installed in mechanically attached, hot asphalt, heat-welded, or as part of cold-applied system. When the top of membrane is surfaced with film, Elastobase V can be used as a base sheet in self-adhered systems.
Elastoflex SA V FR is a self-adhered elastomeric base ply membrane, with fire-retardant additives, for use in low-slope roofing. Elastoflex SA V FR is manufactured using Polyglass’ patented ADESO® Self-Adhered Dual-Compound Technology. With this technology, a “true”Styrene-Butadiene-Styrene (SBS) compound is applied to the top layer of the membrane and an aggressive self-adhesive proprietary compound is applied to the bottom layer. ElastoflexSA V FR is constructed with a tough reinforced fiberglass mat to ensure strength andexcellent dimensional stability.
When used in conjunction with Elastoflex SA P or other approved Polyglass self-adhered cap sheets, Elastoflex SA V FR provides for a cleaner application, improves application speed and removes the need for torches, hot asphalt or bonding adhesives on the job site.
Elastoflex SA V FR membrane is finished with film with laylines on the top surface and a split release film on the bottom surface.