PG 800W is an asphalt-based, clay emulsion product that can be used as a protective roof coating. It can be used over smooth surfaced asphalt built-up, modified bitumen membranes. Also, for use as a base coat for reflective elastomeric coatings. PG 800W can be used as a surface protectant or waterproofing when used in conjunction with polyester reinforcement.
When applied as a roof protectant PG 800W’s unique formulation allows the film to “breathe” while drying and is waterproof upon curing.
PolyBrite 71 is a quality grade, water-based elastomeric base coat. This formulation uses 100% acrylic resins cures to form a seamless fluid applied roof membrane. As a base coat, it provides excellent bleed through resistance.
PolyBrite 71 provides protection from UV and other weather exposures.
PolyBrite 90.2 is a premium grade high solid, moisture cure, liquid applied silicone coating available in White or Kool Grey, which cures to form a seamless membrane when applied over the entire roof area. It also keeps the surface cool, providing protection from ultraviolet sun and other weather exposures.
PolyBrite 71-HS is a high solids, premium grade water-based elastomeric coating. This proprietary formulation using 100% acrylic resins cures to form a seamless fluid applied roof membrane. PolyBrite 71-HS offers the unique ability to extend the life of a roofing system, lower overall life cycle costs and provide excellent bleed through resistance. When applied in white, PolyBrite 71-HS is highly reflective keeping the roof surface cool and providing protection from UV and other weather exposures.
PolyBrite 35 CA is a tough, superior quality water-based elastomeric coating. This proprietary formulation uses a high-tensile strength 100% acrylic resin that cures to form a seamless fluid applied armor over approved roofing substrates. PolyBrite 35 CA can be applied as either a base or top surface coating. This product has excellent adhesion to sprayed polyurethane foam (SPUF) and a variety of other construction and roofing substrates and exceeds the tensile strength of typical acrylic roof coatings.
Specially formulated to provide superior durability and dirt pickup resistance.
PolyBrite 35 CA protects against damaging ultraviolet rays, due to its high reflectance properties, keeping the roof surface cool in high temperatures that result in reduced building energy costs. PolyBrite 35 CA exceeds the minimum requirements of ASTM D6083 Type I and II forming a highly durable protective layer extending the life of the roofing system assembly.
PolyBrite 95.1 is a ready-to-use, solvent borne, moisture cure silicone roof coating available in white or as tinted, which cures to form a seamless membrane when applied over the entire roof area. It also keeps the surface cool, providing protection from ultraviolet sun and other weather exposures.
PolyBrite 90.1 is a premium grade high solids, moisture cure, liquid applied silicone coating which cures to form a seamless membrane when applied over the entire roof area. It also keeps the surface cool, providing protection from ultraviolet sun and other weather exposures.
PolyPUF is sprayed in place polyurethane foam (PUF). This high performance roof insulation product improves building durability, energy efficiency, and one of the lowest lifecycle cost roof systems available today. PolyPUF is seamless and self-flashing. PolyPUF eliminates thermal bridging and adds superior insulation properties for improved building energy efficiency.
PolyPUF roofing insulation can be applied directly to most existing substrates, eliminating the cost of tear-off and reducing waste sent to landfills. PolyPUF can perform for 20 to 30 years with minimal, proper maintenance. The system is renewable for added life! Simply recoat for many years of service.
PolyPUF is closed cell insulation. The insulation adds waterproofing to the roofing systems. Save money throughout the life of the roof with PolyPUF:
PolyBrite 71-HS is a high solids, premium grade water-based elastomeric coating. This proprietary formulation using 100% acrylic resins cures to form a seamless fluid applied roof membrane.
PolyBrite 71-HS offers the unique ability to extend the life of a roofing system, lower overall life cycle costs and provide excellent bleed through resistance. When applied in white, PolyBrite 71-HS is highly reflective keeping the roof surface cool and providing protection from UV and other weather exposures.
PolyBrite 75 is a high tensile, superior grade water-based elastomeric coating. This proprietary formulation using 100% acrylic resins cures to form a seamless liquid applied roof membrane.
PolyBrite 75 can be used as either a base or surface coat. This product has excellent adhesion to sprayed polyurethane foam (SPUF) and a variety of other construction and roofing substrates, and can exceed the expected tensile strength of typical acrylic roof coatings. This product provides excellent durability and dirt pickup resistance.
PolyBrite 24 is a water-based elastomeric coating available in White and Kool Grey, which cures to form a seamless membrane when applied over the entire roof area. PolyBrite 24 offers the unique ability to extend the life cycle of new and existing roof systems, in addition to keeping the surface cool, providing protection from ultraviolet sun and other weather exposures.