![](https://polyglass.ca/wp-content/uploads/2021/06/elastobase-v-200x300-1.png)
![](https://polyglass.ca/wp-content/uploads/2019/03/FBC-1.png)
![](https://polyglass.ca/wp-content/uploads/2019/03/Miami-Dade.png)
![](https://polyglass.ca/wp-content/uploads/2019/03/UL-Membranes.png)
![](https://polyglass.ca/wp-content/uploads/2019/03/FM.png)
![](https://polyglass.ca/wp-content/uploads/2019/03/ASTM1.png)
![](https://polyglass.ca/wp-content/uploads/2019/03/ICC-ES.png)
![](https://polyglass.ca/wp-content/uploads/2019/03/CGSB.png)
![](https://polyglass.ca/wp-content/uploads/2019/03/TDI.png)
![](https://polyglass.ca/wp-content/uploads/2015/12/heat-welded.png)
![](https://polyglass.ca/wp-content/uploads/2015/12/hot-asphalt.png)
![](https://polyglass.ca/wp-content/uploads/2015/12/squeege.png)
Elastobase V is a high quality Styrene-Butadiene-Styrene (SBS) modified bitumen roofing membrane reinforced with a high quality fiberglass mat which provides strength and excellent dimensional stability. The proprietary SBS compound offers quality waterproofing and weathering physical properties. Elastobase V is designed for use as a base ply layer in multi-layer low-slope assemblies.
The top and bottom surfaces are available in sand or factory applied burn-off film.
Elastobase V is intended for use as a base ply or interply membrane and designed to be installed in mechanically attached, hot asphalt, heat-welded, or as part of cold-applied system. When the top of membrane is surfaced with film, Elastobase V can be used as a base sheet in self-adhered systems.