![](https://polyglass.ca/wp-content/uploads/2018/10/Elastoflexs6thnl.png)
![](https://polyglass.ca/wp-content/uploads/2019/03/FBC-1.png)
![](https://polyglass.ca/wp-content/uploads/2019/03/Miami-Dade.png)
![](https://polyglass.ca/wp-content/uploads/2019/03/TDI.png)
![](https://polyglass.ca/wp-content/uploads/2019/03/FM.png)
![](https://polyglass.ca/wp-content/uploads/2019/03/ASTM1.png)
![](https://polyglass.ca/wp-content/uploads/2019/03/ICC-ES.png)
![](https://polyglass.ca/wp-content/uploads/2015/12/heat-welded.png)
![](https://polyglass.ca/wp-content/uploads/2019/03/mechanically-attached.png)
![](https://polyglass.ca/wp-content/uploads/2022/08/hot-asphalt-1.png)
![](https://polyglass.ca/wp-content/uploads/2022/08/Cold-Applied-1.png)
Elastoflex S6 is a smooth surface Styrene-Butadiene-Styrene (SBS) modified bitumen roofing membrane reinforced with a polyester mat saturated with a rubberized asphaltic compound. The non-woven reinforcement provides superior tear strength and puncture resistance.
Elastoflex S6 is designed for use as a base ply or interply layer in multi-layer low-slope assemblies. Membrane is available in a film or sand top surface and a film or sand bottom surface.
Application methods include heat welding, when a film bottom surface is selected, and hot asphalt or cold adhesive when the membrane is sand backed. When a top surface film configuration is selected, successive system layers can be heat welded with an additional ply of Elastoflex S6, Elastoflex S6 G or other Polyglass SBS cap sheet. A top film configuration also allows for the application of a variety of Polyglass SBS or APP self- adhered cap sheets.
Elastoflex S6 is an approved mechanically attached base sheet for the Velociflex system.
Related Documents
Associated Products
![](https://polyglass.ca/wp-content/uploads/2019/06/Polyfresko-G-200x300-3.png)
Polyfresko® G
HIGHLY REFLECTIVE APP CAP SHEET