Elastoflex V G FR is an SBS (elastomeric) modified bitumen low-slope roofing membrane cap sheet with granulated top surface and fire retardant additives. This durable membrane is reinforced with a high quality fiberglass mat to ensure strength and excellent dimensional stability to the product. The proprietary SBS compound offers superior waterproofing and weathering physical properties.
Elastoflex V G FR has a granular top surface and a sand or burn-off film bottom surface. Application methods include heat welding, when a film bottom surface is selected, and hot asphalt or cold adhesive when the membrane is sand backed.
Elastoflex V G FR membrane can be used as part of a Polyglass warranted multi-ply system, when combined with Elastoflex V base or interply sheets or other approved Polyglass base sheets.
PolyPUF is sprayed in place polyurethane foam (PUF). This high performance roof insulation product improves building durability, energy efficiency, and one of the lowest lifecycle cost roof systems available today. PolyPUF is seamless and self-flashing. PolyPUF eliminates thermal bridging and adds superior insulation properties for improved building energy efficiency.
PolyPUF roofing insulation can be applied directly to most existing substrates, eliminating the cost of tear-off and reducing waste sent to landfills. PolyPUF can perform for 20 to 30 years with minimal, proper maintenance. The system is renewable for added life! Simply recoat for many years of service.
PolyPUF is closed cell insulation. The insulation adds waterproofing to the roofing systems. Save money throughout the life of the roof with PolyPUF:
- No Tear-off and disposal costs
- Annual net energy savings from superior insulation and reflective coatings
- Consequential damages due to leaks: zero
- Recoating costs less than replacing a roof membrane system.
Elastoflex S6G membranes are high quality elastomeric, SBS (Styrene-Butadiene-Styrene) modified asphalt roofing membranes reinforced with a non-woven 250 gram polyester mat.
The Elastoflex S6 G, is available with either Polyethylene burn off film for heat welded applications, or sand backed for hot mop or cold adhesive. With superior reinforcement and proprietary formulation, this granulated cap sheet exhibits exceptional tensile strength, puncture resistance, and dimensional stability. The granulated surface, provides long term UV protection.
The Elastoflex S6 G membranes meet, or exceed, the requirements for ASTM D-6164 Type II, are listed by UL and can be used as part of a Polyglass warranted roof assembly.
Elastobase V is a high quality Styrene-Butadiene-Styrene (SBS) modified bitumen roofing membrane reinforced with a high quality fiberglass mat which provides strength and excellent dimensional stability. The proprietary SBS compound offers quality waterproofing and weathering physical properties. Elastobase V is designed for use as a base ply layer in multi-layer low-slope assemblies.
The top and bottom surfaces are available in sand or factory applied burn-off film.
Elastobase V is intended for use as a base ply or interply membrane and designed to be installed in mechanically attached, hot asphalt, heat-welded, or as part of cold-applied system. When the top of membrane is surfaced with film, Elastobase V can be used as a base sheet in self-adhered systems.