PG 800W

PG 800W is an asphalt-based, clay emulsion product that can be used as a protective roof coating. It can be used over smooth surfaced asphalt built-up, modified bitumen membranes. Also, for use as a base coat for reflective elastomeric coatings. PG 800W can be used as a surface protectant or waterproofing when used in conjunction with polyester reinforcement.

When applied as a roof protectant PG 800W’s unique formulation allows the film to “breathe” while drying and is waterproof upon curing.

PG 200

PG 200 is a contractor grade, non-fibered, non-polymer modified asphalt roof coating. PG 200 is ideal as a damp-proofing compound for below grade walls and as a protective coating on the inside of planter boxes. PG 200 serves as a protective surface for metal roofing, masonry, stucco, parapet walls, curbs and base flashings.

Elastoflex VP ULTRA

Elastoflex VP Ultra is a smooth surface Elastomeric (SBS) modified bitumen roofing membrane reinforced with a high performance fiberglass and polyester composite reinforcement that provides flexibility and dimensional stability as well as excellent tear and puncture resistance.

Elastoflex VP Ultra is designed for use as a mechanically attached base sheet in multi-layer low-slope assemblies. Polyglass self-adhered Dual-Match Selvage Edges are manufactured on the opposing sides of the top and bottom surfaces of the membrane. These unique selvage edges are 100% covered with Polyglass’ patent pending SEALLap ULTRA technology which applies a very aggressive self-adhering (SA) compound. This feature provides an immediate waterproofing seal at the laps, including sealing around properly installed plates and fasteners, without adding external heat from torches or hot-air guns. Contractors save labor, time, and equipment expenses. Align – roll – done!

Elastoflex VP Ultra has film surfaces on the top and bottom which enables successive system layers to be heat welded using an additional ply of Elastoflex S6, or a finishing ply of Elastoflex S6 G or other Polyglass torch cap sheets. The selvage edges are protected by siliconized release films that protect the self-adhering compound from contaminants and are easily removed during installation.

Polyvap™ SA G

Polyvap SA G is a self-adhered vapor retarder for use in commercial low-slope roofing applications. Utilizing ADESO® dual-compound self-adhered technology, Polyvap SA G features a polymer modified bitumen upper compound and a proprietary self-adhesive SBS (elastomeric) compound on the bottom. A split release film that protects the self-adhesive compound allows for easy application.

Polyvap SA G is reinforced with a fiberglass mat, and surfaced with aggregate to enhance skid resistance and allow exposure up to 90 days. The rubberized asphalt seals around correctly installed nails on the weathering surface.

Elastoflex SA V Flashing Strips

Elastoflex SA V Flashing Strips are factory cut rolls of Elastoflex SA V membrane featuring patented ADESO® Dual-Compound Technology. The Styrene-Butadiene-Styrene (SBS) modified asphalt compound is applied on the top layer and an aggressive self-adhesive compound is applied on the bottom layer. Elastoflex SA V Flashing Strips are compromised of a high performance reinforced fiberglass mat for excellent dimensional stability. Elastoflex SA V Flashing Strips are finished with a polyolefin film on the top surface and a split release film protecting the adhesive on the bottom surface.

PolyBrite® 90.2

PolyBrite 90.2 is a premium grade high solid, moisture cure, liquid applied silicone coating available in White or Kool Grey, which cures to form a seamless membrane when applied over the entire roof area. It also keeps the surface cool, providing protection from ultraviolet sun and other weather exposures.

Polytherm® HD

Polytherm HD is a high-density polyisocyanurate (iso) insulation panel which has been specifically designed for use as a cover board and has been manufactured with a premium performance coated glass facer on both sides. The 1⁄2″ thick material provides an R-Value of 2.5 which is significantly higher than cover boards made with other materials. (Also available in 5⁄8″ thickness – Western Regions only.)

Elastoflex SA Base

Elastoflex SA Base membrane is a self-adhered, elastomeric base ply low-slope roofing product manufactured using patented ADESO® dual-compound self-adhered technology, whereby a “true” Styrene-Butadiene-Styrene (SBS) modified asphalt compound is applied on the top layer and an aggressive self-adhesive compound is applied on the bottom layer. Elastoflex SA Base membrane is built with a strong non-woven polyester mat to enhance tear strength and puncture resistance, providing a robust membrane that resists natural forces and other factors on the rooftop.

When used in conjunction with Elastoflex SA P or other approved Polyglass self-adhered cap sheet, Elastoflex SA Base provides cleaner application, improved application speed and removes the need for torches, hot asphalt or bonding adhesives on the job site.

Elastoflex SA Base membrane is finished with film that has laylines on the top surface and a split release film on the bottom surface.

Elastoflex SA Base Plus

Elastoflex SA Base Plus membrane is a self-adhered, elastomeric base membrane, manufactured using patented ADESO® dual-compound self-adhesive technology, whereby a “true” Styrene-Butadiene-Styrene (SBS) modified asphalt compound is applied on the top layer and an aggressive self-adhesive compound is applied on the bottom layer. Elastoflex SA Base Plus membrane is built with a strong non-woven polyester mat to enhance tear strength and puncture resistance, providing a robust membrane that resists natural forces and other factors on the rooftop. Elastoflex SA Base Plus membrane is finished with polyolefin film having laylines on the top surface and a split release film on the bottom surface.
Elastoflex SA Base Plus can be used as a base sheet in “Stick 1–Torch 1” applications where the cap sheet is heat welded. Polyglass offers a variety of compatible torch cap sheets, such as Elastoflex S6 G and Elastoflex S6 G HP, and self-adhered options such as Elastoflex SA P.

Elastoflex SA Polar Base®

Elastoflex SA Polar Base membrane is a self-adhered, elastomeric base ply for low-slope roofing. This product is specially designed for colder weather applications. It is manufactured using patented ADESO® Dual-Compound Self-Adhered Technology, whereby a “true” Styrene-Butadiene-Styrene (SBS) modified asphalt compound is applied on the top layer and an aggressive self-adhesive compound is applied on the bottom layer. Elastoflex SA Polar Base membrane is built with a high performance reinforced polyester mat to enhance puncture and tear resistance, and a proprietary “low-temp” self-adhered compound to enhance adhesion at lower temperatures.
When used in conjunction with Elastoflex SA P Polar Cap or other approved Polyglass cap sheets, Elastoflex SA Polar Base provides cleaner application, improves application speed and removes the need for torches, hot asphalt or bonding adhesives on the job site.
Elastoflex SA Polar Base membrane is finished with a polyolefin film displaying preprinted laylines on the top surface, and a split release film on the bottom surface.

Polytherm® G

Polytherm G is a highly energy efficient rigid insulation board composed of a closed-cell Polyisocyanurate foam core laminated to inorganic coated glass facers for superior bonding characteristics. Polytherm G is manufactured with a facer ideally suitable for many types of roofing products, including the direct application of ADESO® dual-compound self-adhered membranes under most project circumstances. Available in flat and tapered panels.

Elastobase® SA

Elastobase SA membrane is a self-adhered, elastomeric base ply low-slope roofing product manufactured using patented ADESO® dual-compound self-adhered technology, whereby a “true” Styrene-Butadiene-Styrene (SBS) modified asphalt compound is applied on the top layer and an aggressive self-adhesive compound is applied on the bottom layer. Elastobase SA membrane is built with a reinforced fiberglass mat which provides strength and excellent dimensional stability.

Elastobase SA is designed to be used as a base sheet in “Stick 1 – Torch 1” applications where the cap sheet is heat welded. Polyglass offers a variety of compatible APP and SBS torch cap sheets.

Elastobase SA membrane is finished with a film top surface and a split release film on the bottom surface.

Polystick® P – Temporarily Unavailable

Polystick P is an elastomeric modified asphalt waterproofing underlayment with a high tensile strength film top surface, designed to resist temperatures up to 250°F. The top surface film is embossed with a skid-resistant proprietary pattern while the bottom surface is constructed with a high-temp compound allowing self-adhered application after removal of the split release paper.

Polystick P is specifically designed as a metal underlayment and can also be used under most mechanically attached tiles and asphalt shingles.

Polyfresko® G SBS SA FR

Polyfresko G SBS SA FR is a self-adhered Styrene-Butadiene-Styrene (SBS) granulated cap sheet with fire retardant additives for use in low-slope roofing. Polyfresko G SBS SA FR is manufactured using Polyglass’ patented ADESO® Dual-Compound Self-Adhered Technology. With this technology, a “true” elastomeric compound is applied to the top of the membrane and an aggressive self-adhesive compound is applied to the bottom. Polyfresko G SBS SA FR is constructed with a superior non-woven polyester reinforcement that provides flexibility and dimensional stability as well as excellent tear and puncture resistance.
Featuring patented CURE Technology®, Polyfresko G SBS SA FR has a highly reflective granule surface which meets, or exceeds most standards for cool roofing. CURE Technology features an innovative thin film technology attributing to exceptional granule retention, minimal staining, scuff resistance and UV stabilization for long-term durability and performance.
Polyfresko G SBS SA FR also features SEALLap® ULTRA, a granule-free side lap with self-adhesive compound and FASTLap®, granule free end lap. Each of these patented features provide for greater ease of application as well as improved long-term performance.
Polyfresko G SBS SA FR can be used as part of a Polyglass warranted multi-ply system, when combined with Elastoflex SA V Plus or other approved Polyglass base sheets.

Polyfresko® G SBS SA

Polyfresko G SBS SA is a self-adhered Styrene-Butadiene-Styrene (SBS) granulated cap sheet for use in low-slope roofing. Polyfresko G SBS SA is manufactured using Polyglass’ patented ADESO® Dual-Compound Self-Adhered Technology. With this technology, a “true” elastomeric compound is applied to the top of the membrane and an aggressive, proprietary, self-adhesive compound is applied to the bottom. Polyfresko G SBS SA is constructed with a superior non-woven polyester reinforcement that provides flexibility and dimensional stability as well as excellent tear and puncture resistance.

Featuring patented CURE Technology®, Polyfresko G SBS SA has a highly reflective granule surface which meets, or exceeds most standards for cool roofing. CURE Technology features an innovative thin film technology attributing to exceptional granule retention, minimal staining, scuff resistance and UV stabilization for long-term durability and performance.
Polyfresko G SBS SA also features SEALLap® ULTRA, a granule-free side lap with self-adhesive compound and FASTLap®, granule free end lap. Each of these patented features provide for greater ease of application as well as improved long-term performance.
Polyfresko G SBS SA can be used as part of a Polyglass warranted multi-ply system, when combined with Elastoflex SA V Plus or other approved Polyglass base sheets.